Schaeffler Group USA Inc.

 
 
 
 
 
 
Media Library

Publications

RSS
Product category
Category of company
Media category
Language
Search term    Please enter one or more search terms (empty space = "AND link"). Search terms with a hyphen should be placed in quotation marks (e.g. "e-business")
If you do not know the correct spelling of a term or if you want to search for families of words, it may be helpful to use so-called wildcards (*) as placeholders for syllables or characters. Wildcards can be placed at any point (e.g. linear *, deep groove * bearings) except at the start of a word.
Brand
View
   
Delivery option
298 of 1703 Media

Current publications

 
 
[|
|
|
|
|
|
|
|
|
|
|
]
View shopping basket
 
 
SERVICE INFO | 2013-06 | SI: INA 0114 | ENGLISH

Change affecting tensioning pulley 531 0203 2

SI: INA 0114

Publisher: Schaeffler Automotive Aftermarket GmbH & Co. KG

 
SERVICE INFO | 2013-06 | SI: INA 0113 | ENGLISH

Change affecting hydraulic bucket tappe

SI: INA 0113

Publisher: Schaeffler Automotive Aftermarket GmbH & Co. KG

 
SERVICE INFO | 2013-06 | SI: INA 0112 | ENGLISH

Change affecting tensioning pulley 531 0813 1

SI:INA 0112

Publisher: Schaeffler Automotive Aftermarket GmbH & Co. KG

 
DATA SHEET | 2013-05 | ENGLISH

DMF-Torquetable

The correct tightening torques of the fitting bolts are required for a professional replacement of the dual mass flywheel. This chart shows the correct tightening torque by LuK Dual Mass Flywheel part number. The table also shows if the fitting bolts can be re-used or if new ones should be used for fitting of the new dual mass flywheel.

Publisher: Schaeffler Automotive Aftermarket GmbH & Co. KG

 
DMF-Data-Table
DATA SHEET | 2013-05 | ENGLISH

DMF-Data-Table

A 100% functional test includes among other things testing the characteristics of the arc springs in the Dual Mass Flywheel (DMF) during compression. The testing must be performed at a special test facility as it cannot be carried out with standard workshop equipment. However, the LuK DMF special tool 400 0080 10 allows you to perform the most important measurements – freeplay angle and rock – in a workshop environment. The rated values for freeplay angle and rock vary depending on the type of DMF.

Publisher: Schaeffler Automotive Aftermarket GmbH & Co. KG

 
 
[|
|
|
|
|
|
|
|
|
|
|
]
View shopping basket